Product description
| Ready to go in just 3 minutes! Particularly innovative and intuitive: When the packaging is opened, the filter plug automatically detaches from the filter. This pushes the filter out into its insert position and the bonnet can be put on immediately. Thanks to elastic inner strapping, no additional tightening is necessary. All you need to do: open the packaging, remove the bonnet and put it on - and then leave the danger zone. |
|---|
Robust and ergonomic at the same time! Dräger knows: Escape bonnets and comparable equipment are normally carried daily and rarely opened - except in dangerous situations. That is why the Dräger PARAT was packaged with ergonomics and comfort in mind. When in use, the escape bonnet can be carried by means of a belt, shoulder strap, alligator clip or belt clip. It can be just as easily mounted on a wall using a bracket. At the same time, the packaging of the Dräger PARAT is robust and protects the escape unit from damage. |
|
|---|
| Hard case packaging: The hard case protects against splashing water (IP54) and has a viewing window to check the expiry date of the filter and the condition of the unit. |
|---|
| Reliable protection! The escape bonnets are equipped with powerful filters. The filters reliably protect against a wide range of toxic industrial and fire gases, vapours and particles. Particularly practical: The protective seal on the closure of the packaging shows you that the packaging has not been opened. In addition, the filter is tightly sealed with two filter plugs. . |
|---|
16 years lifetime! If you change the filter after 8 years, the service life increases to a total of 16 years. This offers you a great cost saving in the long run. The filter can be changed very easily by yourself after appropriate training. |
|
|---|
Application video: Putting on the Dräger PARAT escape bonnet hard case: |
|
|---|
Application video: Putting on the Dräger PARAT escape bonnet Soft Pack: |
|
|---|
Application video: Donning the Dräger PARAT escape bonnet Single Pack: |
|---|
Technical data
- Manufacturer: Drägerwerk AG & Co. KGaA, Moislinger Allee 53-55, DE-23558 Lübeck, info@draeger.com
- Responsible Person: Drägerwerk AG & Co. KGaA, Moislinger Allee 53-55, DE-23558 Lübeck, info@draeger.com
Product description
| Ready to go in just 3 minutes! Particularly innovative and intuitive: When the packaging is opened, the filter plug automatically detaches from the filter. This pushes the filter out into its insert position and the bonnet can be put on immediately. Thanks to elastic inner strapping, no additional tightening is necessary. All you need to do: open the packaging, remove the bonnet and put it on - and then leave the danger zone. |
|---|
Robust and ergonomic at the same time! Dräger knows: Escape bonnets and comparable equipment are normally carried daily and rarely opened - except in dangerous situations. That is why the Dräger PARAT was packaged with ergonomics and comfort in mind. When in use, the escape bonnet can be carried by means of a belt, shoulder strap, alligator clip or belt clip. It can be just as easily mounted on a wall using a bracket. At the same time, the packaging of the Dräger PARAT is robust and protects the escape unit from damage. |
|
|---|
| Hard case packaging: The hard case protects against splashing water (IP54) and has a viewing window to check the expiry date of the filter and the condition of the unit. |
|---|
| Reliable protection! The escape bonnets are equipped with powerful filters. The filters reliably protect against a wide range of toxic industrial and fire gases, vapours and particles. Particularly practical: The protective seal on the closure of the packaging shows you that the packaging has not been opened. In addition, the filter is tightly sealed with two filter plugs. . |
|---|
16 years lifetime! If you change the filter after 8 years, the service life increases to a total of 16 years. This offers you a great cost saving in the long run. The filter can be changed very easily by yourself after appropriate training. |
|
|---|
Application video: Putting on the Dräger PARAT escape bonnet hard case: |
|
|---|
Application video: Putting on the Dräger PARAT escape bonnet Soft Pack: |
|
|---|
Application video: Donning the Dräger PARAT escape bonnet Single Pack: |
|---|
Technical data
- Manufacturer: Drägerwerk AG & Co. KGaA, Moislinger Allee 53-55, DE-23558 Lübeck, info@draeger.com
- Responsible Person: Drägerwerk AG & Co. KGaA, Moislinger Allee 53-55, DE-23558 Lübeck, info@draeger.com